Sennheiser Microphone SDC 8000 D User Manual

SDC 8000 D

Conference and Information Systems | SDC 8000

Cat. No. 009412

General Description

The digital SDC 8000 D delegate unit is an ideal choice for both mobile and fixed

conference systems. Its compact and elegant design harmoniously blends in with

any conference room. The unit features a high-quality built-in loudspeaker, provid-

ing excellent sound at a pleasant volume. By pressing the Mic key, the conference

participants can either switch on the microphone or signal their request to speak.

Technical Data

Frequency response ................................. 100 – 14,000 Hz

Pick-up pattern .........................................................cardioid

Headphone connector.................. 3.5 mm mono (> 32 Ω)

Power supply.............................................................. 48 V DC

Power consumption............................................max. 3.7 W

Operating temperature .........................................0 – 50 °C

Standards.....................................................................IEC 849

Colour..........................................................Pantone Black 7C

Housing .............................................................................. ABS

Dimensions............................................150 x 80 x 185 mm

Gooseneck length .................................................... 380 mm

Weight............................................................................. 620 g

Features

Built-in high-quality loudspeaker (automatically muted when the

microphone is switched on)

Microphone on/off (request) key

Gooseneck microphone with red LED ring

Two RJ 45 sockets for connecting up to 15 units in one cable line

Two 3.5 mm headphone jacks for headphones or induction couplers

for the hearing impaired

Two separate headphone volume controls

Delivery includes: 1 SDC 8000 D Delegate Unit

Accessories

RJ 45 conference bus cables, type 24 AWG,

available lengths: 2 m, 3 m, 5 m, 10 m, 20 m, 50 m

(Please note: Do not use standard Ethernet-AWG 26 cables!)

HD 410-D, HD 1029 headphones