Product Specifications
SM31FH Fitness Headset Condenser Microphone
Overview
The new SM31FH adds hydrophobic materials to the industry-standard, road-tested Shure SM family in a rugged and durable cardioid condenser microphone.
TA4F 4-pin connectors make it a viable replacement for any existing Shure wireless headset system, and is also available with BLX and GLX-D wireless system
bundles. The moisture-repelling cartridge housing protects the microphone and ensures a long lifetime of use, all but eliminating the need to frequently replace
typical headsets.
Features
• Wearable wireframe headset with secure, comfortable fit made for fitness and aerobics instructors
• Integrated moisture-repelling hydrophobic fabric protects the microphone element from harmful corrosion for use in humid environments
• Flexible gooseneck design provides discrete adjustment options to optimize placement for greatest isolation
• Lightweight and low-profile form factors stave off fatigue during high-impact use
• Compatible with Shure wireless bodypack systems for direct replacement of TA4F-connected microphones
• Available with a wide variety of Shure wireless systems, renowned for their ease of use and reliable performance
• Included windscreen tames plosive, breath and wind noise for clean and intelligble sound
• Tailored frequency response refined for crisp and clear vocal reproduction
• Legendary Shure precision engineering for durability and performance
SM31FH
Available Models
SM31FH-TQG
BLX1288/SM31
BLX14/SM31
BLX188/SM31
GLXD14/SM31
Fitness Headset Cardioid Condenser Microphone with Windscreen
BLX Dual-Channel Wireless Combo System
BLX Wireless Headset System
BLX Dual-Channel Wireless Headset System
GLX-D Digital Wireless Headset System
Specifications
Type
Electret Condenser
45 to 20,000 Hz
Unidirectional (Cardioid)
600 Ω
Frequency Response
Polar Pattern
Output Impedance
@ 1 kHz
Audio Output Level
Signal-To-Noise Ratio[1]
@ 1 kHz
-50 dBV/Pa
66 dB
Maximum SPL[1]
145.0 dB
117.0 dB
28 dB
1000 Ω load, @ 3% THD
Dynamic Range[1]
@ 1 kHz, 1000 Ω load
Equivalent Output Noise[1]
Typical, A-Weighted
Power Requirements
Polarity
+5 V DC (nominal), 10 V maximum (DC bias)
Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1
Cable
1.1 m (45 in.)
TA4F
Connector
Net Weight
60 g (2.11 oz.)
[1]Measurements taken using RK100PK preamp set @ 0 dB using 8k bias resistor.
* All specifications measured with a 48 VDC phantom power supply. The microphone operates at lower voltages, but with slightly decreased headroom and sensitivity.
Optional Accessories
RK379
Replacement kit with clip + 2 foam windscreens
Polar Patterns
Frequency Response
20
15
10
5
0
-5
-10
-15
-20
-25
-30
20
100
1k
10k
20k
Hz
1,000 Hz
5,000 Hz
10,000 Hz
125 Hz
250 Hz
500 Hz
0.6 m (2 ft.) from sound source
1 cm (0.4 in) from sound source
©2013 Shure Incorporated
|
Sennheiser Microphone SK 1006 User Manual
Sharper Image Oven 8217SI User Manual
Sharp Microwave Oven R 980J User Manual
Sharp Projection Television XG NV6XU User Manual
Shindaiwa Vacuum Cleaner 82052 User Manual
Sony Laptop VPCF120FDB User Manual
Sony Projection Television KP 41S4 User Manual
StarTechcom Computer Hardware PCISOUND5CH User Manual
Stiga Lawn Mower 8211 0001 70 User Manual
T Fal Toaster Avante Deluxe Bagel User Manual