SonicWALL Riding Toy TZ 170 User Manual

COMPREHENSIVE INTERNET SECURITY  
SonicWALL Internet Security Appliances  
TZ 170 Quick Start Guide  
 
Quick Start Installation  
Thank you for purchasing a SonicWALL Internet security appliance. The SonicWALL acts as a secure  
barrier between your private LAN and the public Internet (WAN) to protect your networks from security  
threats on the Internet.  
This Quick Start Guide provides instructions for installing and configuring your SonicWALL TZ 170 as an  
Office Gateway on your network. After you complete this guide, you can access the Internet securely  
through your LAN connection.  
Before You Begin  
Check Package Contents  
One SonicWALL Internet Security Appliance  
One SonicWALL Quick Start Guide  
One SonicWALL Firmware and Documentation CD  
One Ethernet cable  
One RJ45 CLI cable*  
One 5 Volt DC power supply  
One Power cord**  
*The RJ45 CLI cable is only included with the purchase of a TZ 170 with SonicOS Enhanced.  
**A power cord is included only with units shipped to North America.  
If any items are missing from your package, contact SonicWALL, Inc.  
Web: <http://www.sonicwall.com/support/> Phone: (888) 777-1476  
Overview of the SonicWALL TZ 170 Hardware  
Test Light  
WAN  
Link, 100, Activity  
opt  
Power Light  
LAN  
Link, Activity  
Link, 100, Activity  
LAN Ports 1-5  
Optional Port  
Power  
Console Port  
WAN Port  
SonicWALL TZ 170 Quick Start Guide Page 1  
 
What You Need to Get Connected  
SonicWALL Internet Security Appliance  
Internet Connection  
PC or Macintosh computer  
A Web browser (Microsoft Internet Explorer v5.0 or later, or Netscape Navigator v4.7 or later - your  
Web browser must support Java and HTTP uploads in order to fully manage the SonicWALL.)  
Internet Service Provider (ISP) Information TEL:______________________________  
ISP Connection Information  
Before you can begin installing your SonicWALL, determine how your ISP distributes IP addresses. Call  
your ISP to find out if your Internet connection uses DHCP to obtain an IP address, or PPPoE (typical of  
DSL access), or if they have given you a static IP address. Record all of your networking information in the  
checklist below:  
IP Addressing using DHCP  
No action necessary. The SonicWALL automatically detects the presence of a DHCP server during setup.  
IP Addressing using PPPoE  
User Name:________________________  
Password:_________________________  
IP Addressing using a Single, Static Public IP Address  
IP Address:________________________  
Subnet Mask:______________________  
Default Gateway:___________________  
Primary DNS:______________________  
Secondary DNS:___________________  
If you are not using one of the network configurations above, step by step installation instructions for  
additional networking methods are found in Configuring the Network Mode section of your Administrator’s  
Guide. The Administrator’s Guide is located on your product CD and requires Acrobat Reader to view it.  
Alert!  
Acrobat Reader is also provided on your product CD.  
Glossary  
IP Address - A set of numbers in the format, XXX.XXX.XXX.XXX, used to address computers on the Internet.  
Subnet Mask - A set of numbers in IP address format using 255 in place of the XXX’s. It determines the type of  
network by “masking” out numbers. A Class C network has a subnet mask of 255.255.255.0.  
Default Gateway - A device on an internetwork that forwards packets to another network.  
DNS (Domain Name System) Server - A computer that “looks up” the name of a computer and finds the  
corresponding IP address. This allows you to access computers on the Internet without configuring IP addresses  
for remote connections.  
PPPoE - Point to Point Protocol over Ethernet supports the transmission of network packets over serial transmis-  
sion lines such as DSL or POTS (Plain Old Telephone Service).  
DHCP - Dynamic Host Configuration Protocol allocates IP addresses to computers on the network automatically  
without assigning a computer a static (fixed) IP address.  
VPN - Virtual Private Network is a “virtual” network that encrypts data and sends it privately over the Public  
Internet  
Setup Continues  
Page 2  
 
Setting Up Your SonicWALL  
Applying Power to the SonicWALL  
Attach the power supply to the power cord. Plug the power adapter into the SonicWALL and plug  
the other end into a power outlet.  
1
The Power light turns green when power is applied to the SonicWALL. Also, the Test light remains  
lit for approximately 90 seconds while the SonicWALL performs a series of diagnostic tests.  
Connecting the SonicWALL to the Network  
Connect one end of an Ethernet cable to your DSL modem, cable modem, or Internet router.  
2
Connect the other end of the Ethernet cable to the WAN port of the SonicWALL. The link LED  
lights indicating an active connection. .  
Connect one end of an Ethernet cable to the Ethernet port of your computer.  
3
Connect the other end of the cable to LAN 1 port of your SonicWALL. The link LED lights  
indicating an active connection.  
Setup Continues  
SonicWALL TZ 170 Quick Start Guide Page 3  
 
4
Configuring Your Management Station  
Your SonicWALL is configured with the default IP address of 192.168.168.168. This IP address is used to  
initially access the Management interface of the SonicWALL and launch the Setup Wizard. To access the  
Management interface for the first time, you must configure your computer with an IP address in the same  
network range as the SonicWALL. Follow the instructions below for your operating system:  
Windows XP  
1. Click Start, then Connect to.  
2. Right-click on the Local Area Connection icon and select Properties.  
3. Open the Local Area Connection Properties window.  
4. Double-click Internet Protocol (TCP/IP) to open the Internet Protocol (TCP/IP) Properties window.  
5. Select Use the following IP address and type 192.168.168.200 in the IP address field.  
6. Type 255.255.255.0 in the Subnet Mask field.  
7. Type the DNS IP address in the Preferred DNS Server field. If you have more than one address, type the second  
one in the Alternate DNS server field.  
8. Click OK for the settings to take effect on the computer.  
Windows 2000  
1. From your Windows task bar, click Start.  
2. Then click Settings.  
3. Click Network and Dial-up Connections.  
4. Double-click the network icon to open the connection window.  
5. Click Properties.  
6. Highlight Internet Protocol (TCP/IP) and click Properties.  
7. Select Use the following IP address.  
8. Enter 192.168.168.200 in the IP address field.  
9. Enter 255.255.255.0 in the Subnet field.  
10. If you have a DNS Server IP address from your ISP, enter it in the Preferred DNS Server field.  
Windows NT  
1. From the Start list, highlight Settings and then select Control Panel.  
2. Double-click the Network icon in the Control Panel window.  
3. Double-click TCP/IP in the TCP/IP Properties window.  
4. Select Specify an IP Address.  
5. Type "192.168.168.200" in the IP Address field.  
6. Type "255.255.255.0" in the Subnet Mask field.  
7. Click DNS at the top of the window.  
8. Type the DNS IP address in the Preferred DNS Server field. If you have more than one address, enter the  
second one in the Alternate DNS server field.  
9. Click OK, and then click OK again.  
10. Restart the computer.  
Setup Continues  
Page 4  
 
Windows 98  
1. From the Start list, highlight Settings and then select Control Panel. Double-click the Network icon in the Control  
Panel window.  
2. Double-click TCP/IP in the TCP/IP Properties window.  
3. Select Specify an IP Address.  
4. Type "192.168.168.200" in the IP Address field.  
5. Type "255.255.255.0" in the Subnet Mask field.  
6. Click DNS Configuration.  
7. Type the DNS IP address in the Preferred DNS Server field. If you have more than one address, type the second  
one in the Alternate DNS server field.  
8. Click OK, and then click OK again.  
9. Restart the computer for changes to take effect.  
Launching the Setup Wizard  
To begin the configuration of your SonicWALL, you must log into the SonicWALL using a Web  
5
browser and the default LAN IP address, 192.168.168.168, of the SonicWALL. Follow the  
instructions below:  
1. Launch your Web browser.  
Because you are temporarily disconnected from the Internet, you may receive an error message when your  
Web browser first opens. This does not affect your installation process. Continue with the steps below.  
Alert!  
2. Enter 192.168.168.168 in the Location or Address field.  
Your Web browser must support Java and HTTP uploads in order to fully manage the SonicWALL appliance.  
Internet Explorer 5.0 or higher, as well as Netscape Navigator 4.0 or higher, are recommended.  
Alert!  
3. The SonicWALL Installation Wizard launches and guides you through the configuration and  
setup of your SonicWALL.  
Setup Continues  
SonicWALL TZ 170 Quick Start Guide Page 5  
 
If you cannot connect to the SonicWALL TZ 170, check the following:  
Did you correctly enter the SonicWALL TZ 170 LAN IP address in your browser window?  
Is the SonicWALL TZ 170 connected to the same network as your computer?  
Have you changed the TCP/IP network settings on your computer? (Step 4)  
The Setup Wizard  
6
The Setup Wizard provides easy to follow instructions for configuring the SonicWALL on your  
network. You must have your ISP information to complete the configuration using the Setup  
Wizard.  
Certain browser configurations may not launch the Installation Wizard automatically. In this case,  
TIP!  
you must log into the SonicWALL using “Admin” as the User Name and “password” as the  
Password. After you log into the SonicWALL, click Wizards. Select Setup to begin configuring the  
SonicWALL.  
Follow the steps below for the quickest and easiest configuration for the TZ 170 as an Office  
Gateway:  
Step 1: Welcome - Read the information on the Welcome dialogue box. Click Next.  
Step 2: Change Password - change the TZ 170 password to your personal password. Click  
Next.  
Step 3: Change Time Zone - change the Time Zone to your location’s Time Zone. Click Next.  
Step 4: WAN Network Mode - the type of network connectivity is detected automatically. If you  
want to select a different network mode, consult the SonicOS 2.0s Administrator’s Guide on your  
product CD for more information.  
Step 5: WAN Network Mode - if PPPoE is detected as your network connection, enter your user  
name and password from your ISP. Click Next. If a DHCP server is detected, click Next.  
Step 6: LAN Settings - Review the LAN IP address and subnet mask. Use the default values.  
Step 11: SonicWALL Configuration Summary - Write down your network configuration  
information below. Click Apply.  
Setup Wizard Complete - Your SonicWALL is now successfully configured for LAN and Internet  
access. Click Restart to complete the configuration process.  
Network Settings  
WAN - Network Mode:______________ IP Address:____________ Subnet Mask:____________  
Router IP Address:_______________ DNS Server 1 IP Address:______________  
DNS Server 2 IP Address:_________________  
LAN - IP Address:______________ Subnet Mask:______________DHCP Enabled: Yes___ No__  
SonicWALL SonicOS 2.0s firmware and access technical support.  
TIP!  
Setup Continues  
Page 6  
 
Configuring Computers on the LAN  
When the SonicWALL restarts, a window displays information to configure computers on your LAN.  
7
DHCP Server Enabled on the SonicWALL TZ 170  
If you enabled the SonicWALL DHCP Server or have a DHCP Server on your LAN, each computer  
must be configured to obtain its IP address dynamically. After the SonicWALL has restarted,  
change the network settings on the computers on the LAN. Follow the steps below for your  
operating system:  
Windows XP  
1. Click Start, then Connect to.  
2. Right-click on the Local Area Connection icon and select Properties.  
3. Open the Local Area Connection Properties window.  
4. Double-click Internet Protocol (TCP/IP) to open the Internet Protocol (TCP/IP) Properties window.  
5. Select Obtain an IP address automatically.  
6. Select Obtain DNS Server automatically.  
7. Click OK and then OK again for the settings to take effect on the computer.  
Windows 2000  
1. From your Windows task bar, click Start.  
2. Then click Settings.  
3. Click Network and Dial-up Connections.  
4. Double-click the network icon to open the connection window.  
5. Click Properties.  
6. Highlight Internet Protocol (TCP/IP) and click Properties.  
7. Select Obtain an IP address automatically.  
8. Select Obtain DNS Server automatically.  
9. Click OK and then OK again for the settings to take effect on the computer.  
Windows NT  
1. From the Start list, highlight Settings and then select Control Panel.  
2. Double-click the Network icon in the Control Panel window.  
3. Double-click TCP/IP in the TCP/IP Properties window.  
4. Select Obtain an IP address automatically.  
5. Click DNS at the top of the window.  
6. Select Obtain DNS Server automatically.  
7. Click OK, and then click OK again.  
8. Restart the computer.  
Setup Continues  
SonicWALL TZ 170 Quick Start Guide Page 7  
 
Windows 98  
1. From the Start list, highlight Settings and then select Control Panel. Double-click the Network icon in the Control  
Panel window.  
2. Double-click TCP/IP in the TCP/IP Properties window.  
3. Select Obtain IP Address automatically.  
4. Click DNS Configuration.  
5. Select Obtain DNS Server automatically.  
6. Click OK, and then click OK again.  
7. Restart the computer for changes to take effect.  
LAN Configuration Complete!  
The SonicWALL is now functioning and protecting your network from Internet-based attacks and break-ins.  
DHCP Server Disabled  
If you did not enable the SonicWALL DHCP server or you do not have a DHCP server on your network,  
you must configure each computer with a static IP address from your LAN IP address range.  
After the SonicWALL has restarted, change the nework settings on computers located on the LAN.  
Follow the steps below to configure computers on your LAN:  
Windows XP  
1. Click Start, then Connect to.  
2. Right-click on the Local Area Connection icon and select Properties.  
3. Open the Local Area Connection Properties window.  
4. Double-click Internet Protocol (TCP/IP) to open the Internet Protocol (TCP/IP) Properties window.  
5. Select Use the following IP address and type an IP address from your LAN IP range in the IP address field.  
6. Type 255.255.255.0 in the Subnet Mask field.  
7. Type the SonicWALL LAN IP Address into the Default Gateway field.  
8. Type the DNS IP address in the Preferred DNS Server field. If you have more than one address, type the second  
one in the Alternate DNS server field.  
9. Click OK for the settings to take effect on the computer.  
Windows 2000  
1. From your Windows task bar, click Start.  
2. Then click Settings.  
3. Click Network and Dial-up Connections.  
4. Double-click the network icon to open the connection window.  
5. Click Properties.  
6. Highlight Internet Protocol (TCP/IP) and click Properties.  
7. Select Use the following IP address.  
8. Type an IP address from your LAN IP range IP address field.  
9. Enter 255.255.255.0 in the Subnet field.  
10. Type the SonicWALL LAN IP Address into the Default Gateway field.  
11. If you have a DNS Server IP address from your ISP, enter it in the Preferred DNS Server field.  
Page 8  
 
Windows NT  
1. From the Start list, highlight Settings and then select Control Panel.  
2. Double-click the Network icon in the Control Panel window.  
3. Double-click TCP/IP in the TCP/IP Properties window.  
4. Select Specify an IP Address.  
5. Type an IP address from your LAN IP range in the IP Address field.  
6. Type 255.255.255.0 in the Subnet Mask field.  
7. Type the SonicWALL LAN IP Address in the Default Gateway field.  
8. Click DNS at the top of the window.  
9. Type the DNS IP address in the Preferred DNS Server field. If you have more than one address, enter the  
second one in the Alternate DNS server field.  
10. Click OK, and then click OK again.  
11. Restart the computer.  
Windows 98  
1. From the Start list, highlight Settings and then select Control Panel. Double-click the Network icon in the Control  
Panel window.  
2. Double-click TCP/IP in the TCP/IP Properties window.  
3. Select Specify an IP Address.  
4. Type an IP address from your LAN IP range in the IP Address field.  
5. Type "255.255.255.0" in the Subnet Mask field.  
6. Type the SonicWALL LAN IP Address in the Default Gateway field.  
7. Click DNS Configuration.  
8. Type the DNS IP address in the Preferred DNS Server field. If you have more than one address, type the second  
one in the Alternate DNS server field.  
9. Click OK, and then click OK again.  
10. Restart the computer for changes to take effect.  
LAN Configuration Complete!  
The SonicWALL is now functioning and protecting your network from Internet-based attacks and break-ins.  
SonicWALL TZ 170 Quick Start Guide Page 9  
 
SonicWALL TZ 170 Technical Specifications  
Processor: SonicWALL Security Processor  
Dimensions: 9.07 x 6.63 x 1.63 inches  
(23.03 x 16.84 x 4.14 cm)  
RAM: 64 MB  
Weight: 1.15 lb. (0.52 kg)  
Flash Memory: 8 MB  
Interfaces: 7 10/100 auto-sensing Ethernet  
(1) WAN 10/100 Base-T  
LEDs:  
Status (Power, Test)  
(1) Optional Port  
(1) 5-port Auto-MDIX Switch  
(1) RJ45 Console Port  
LAN 1 per port (multifunctional)  
WAN (link, activity, 100)  
Optional Port (link, activity, 100)  
Firewall Performance:90 Mbps  
Site to Site VPN Policies:  
10 Node - 1  
Input Power: 100V to 240VAC  
Power Consumption: 12 Watts Maximum  
25 Node - 10  
Unrestricted Nodes- 10  
Bundled VPN Client Sessions:  
10 Node - 0  
25 Node - 1  
Standards: NAT, DNS, RIPv1/v2, TCP/IP, UDP,  
ICMP, HTTP, HTTPS, IPSec, ISAKMP/IKE, SNMP,  
DHCP, PPPoE, L2TP, PPTP, RADIUS  
Unrestricted Nodes- 1  
Firewall Nodes: 10/25/Unrestricted  
Environment:  
o
o
Temperatures 40 - 105 F, (5-40 C)  
Relative Humidity 10-90% noncondensing  
Concurrent Connections: 6,000  
Operational Altitude: 0 to 13,123 ft. (4000m)  
VPN Performance: 25+ Mbps (3DES and AES)  
Operating System: SonicOS Standard  
upgradeable to SonicOS Enhanced  
Major Regulatory Compliance:  
EMC: FCC Class B, ICES Class B, CE, C-tick,  
VCCI, BSMI, MIC  
Safety: UL, cUL, TUV/GS, CB, NOM  
Page 10  
 
Appendix  
Resetting the Firmware to Factory Default Settings  
At times, it may be necessary to reset the firmware on your SonicWALL TZ 170. For example, if  
you’ve forgotten your password and cannot access the management interface, resetting the  
firmware allows you to reset the SonicWALL TZ 170 to factory default settings including the user  
name and password.  
To quickly reset the firmware to factory default settings, locate the Reset button on the back of  
the SonicWALL TZ 170 next to the LAN connection. Using a pointed object, press and hold the  
Reset button for 5-10 seconds. All settings are returned to the factory default settings including  
the password and the default LAN IP address of 192.168.168.168.  
Note: This reset method does not require reloading the firmware.  
Resetting Firmware if Firmware is Corrupted (Test Light remains on)  
If the Test light remains on after 90 seconds, the firmware may be corrupted. Follow these steps  
to load firmware onto the appliance:  
1. To load new firmware onto the SonicWALL TZ 170, power down the appliance.  
2. Wait 30 seconds, press and hold the Reset button.  
3. At the same time, power on the appliance.  
4. Continue to hold the Reset button until the Test light begins blinking.  
5. Once the Test light stops blinking and remains lit, release the Reset button.  
6. Open a Web browser, and type 192.168.168.168 into the Address or Location field.  
7. A Web page displays the message, “Firmware appears to be corrupted.” Click Browse to open a File  
Open dialogue box. Browse to the location of the firmware file. A rescue version of the firmware is  
located on the product CD.  
account. Download the latest version of the firmware and then upload it to your appliance.  
SonicWALL TZ 170 Quick Start Guide Page 11  
 

Sennheiser Stereo Receiver EK 1013 6 1 User Manual
Shure Headphones SRH1440 User Manual
Shure Microphone PGXD User Manual
Sony Blu ray Player BDP S480 User Manual
Sony Laptop VPCS137GX B User Manual
Sony Stereo Receiver STR DE495 User Manual
Southbend Convection Oven 460AA 3G User Manual
StarTechcom Network Card EC1000S User Manual
Stiga Lawn Mower 107 M User Manual
System Sensor Smoke Alarm 24TSRB User Manual