StarTechcom Computer Hardware PEX2PCI4 User Manual

PCI Express to 4 Slot PCI Expansion System  
PEX2PCI4  
DE: Bedienungsanleitung - de.startech.com  
FR: Guide de l'utilisateur - fr.startech.com  
ES: Guía del usuario - es.startech.com  
IT: Guida per l'uso - it.startech.com  
NL: Gebruiksaanwijzing - nl.startech.com  
PT: Guia do usuário - pt.startech.com  
MDanouawl Rnevliosioand: 04f/r0o4/m2011Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Introduction .......................................................................................................................................................1  
Features...........................................................................................................................................................1  
Package Contents.....................................................................................................................................1  
Installation............................................................................................................................................................2  
Using the PCI Express Adapter (typical) .....................................................................................2  
Using the ExpressCard Host Adapter Card ..............................................................................4  
Software Installation ...............................................................................................................................5  
Specifications.....................................................................................................................................................6  
EC2PCI (optional).......................................................................................................................................6  
Accessory Products from StarTech.com............................................................................................7  
Technical Support...........................................................................................................................................8  
Warranty Information....................................................................................................................................8  
Instruction Manual  
i
 
Introduction  
Thank you for purchasing a StarTech.com PCI Express to Four Slot PCI Expansion Bay. This  
product allows you to add PCI expandability to your computer, using an available PCI Express  
or ExpressCard* slot, helping to bridge the gap between older PCI expansion cards and  
motherboards with newer interface capabilities.  
Features  
Supports 1x 2.5Gb/s PCI Express Data Transfer Rates  
IPCI Slots are fully PCI Bus Rev. 2.3 Compliant  
Supports both 5V and 3.3V Add-in Cards  
Supports Windows 2000/2003/XP/ 7/Vista™/Mac OS X  
Package Contents  
1 x PCI Expansion Bay  
1 x PCI Express Host Card  
1 x Low Profile Bracket  
1 x Data Transfer Cable  
1 x Power Adapter  
1 x Instruction Manual  
1 x Driver CD  
1 x Screw Kit  
Accessories  
*Please note that PEX2PCI4 can be connected to a host computer ExpressCard port, using the  
EC2PCI ExpressCard to PCI adapter, in place of the PCI Express Card adapter that is packaged  
with PEX2PCI4.  
As such, if you wish to connect to the PEX2PCI4 using an ExpressCard connection, EC2PCI is a  
required accessory.  
Instruction Manual  
1
 
Installation  
WARNING: PEX2PCI4 uses a DVI interface to connect the the PCI Express and PCI components.  
When connecting the PCI expansion board to the PCI Express card, please ensure that the DVI  
port provided by PEX2PCI4 is not confused with a DVI port provided by the computer video  
card, as this could damage the video card, as well as the PCI Express expansion card and PCI  
expansion slot board.  
Using the PCI Express Adapter (typical)  
The following diagram is a visual depiction of the instructions on the following page, which  
account for typical installation of the PEX2PCI4 using the (included) PCI Express Adapter Card.  
For details on how to install PEX2PCI4 using the optional (not included) ExpressCard adapter  
in place of the PCI Express adapter, please refer to the the section titled Using the ExpressCard  
Adapter.  
1-5  
6
8
Instruction Manual  
2
 
1. Turn OFF the computer power before installation, and remove the chassis cover from the  
computer. Similarly, ensure the PEX2PCI4 is not powered at this time.  
Since both the PC system and the Expansion Box are self-powered, you need to follow the  
correct ON/OFF sequence as follows:  
Power Off Sequence: Power off your PC system, then the Expansion Box  
Power On Sequence: Power on the Expansion Box first, then power on your PC system.  
2. Locate an unused PCI Express slot and remove the corresponding slot cover from rear panel  
of the computer chassis. Retain the screw (if applicable) used to hold the slot cover in  
place.  
3. Align the PCI Express card with the unused PCI Express expansion slot. Applying pressure  
evenly across the top edge of the expansion card, firmly but gently insert the card into the  
slot, ensuring that the card is properly aligned with the rear panel slot.  
4. Secure the card to the motherboard and rear chassis, using the screw removed in step 2.  
5. Replace the chassis cover (removed in step 1).  
6. Connect the included DVI-like* cable to the DVI-like port provided by the newly installed PCI  
Express card. Attach the remaining DVI-like connector provided by the cable to the PCI  
Expansion Bay DVI port.  
7. Open the top cover of the PEX2PCI4 Expansion Box by removing the screws.  
There are four PCI slots in the Expansion Box. Find an unused slot, remove the “blankPCI  
card bracket that was pre-installed from the factory.  
Insert the PCI card(s) you wish to install, into the available PCI slots, then replace the top  
cover of the Expansion Box.  
8. Connect the AC Power Adapter to the power port (situated to the left of the DVI-like input) on  
the rear panel of the PEX2PCI4 main unit.  
9. Turn on the Expansion Box power using the power switch next to the Expansion Cable, then  
power on the PC system.  
10. Once the Expansion Box has successfully been connected to the host computer, proceed to  
the section titled Software Installation.  
Instruction Manual  
3
 
Using the ExpressCard Host Adapter Card  
The following diagram is a visual depiction of the instructions on the following page, which  
account for installation of the PEX2PCI4 using the (accessory) EC2PCI ExpressCard Adapter (must  
be purchased separately).  
1. Turn OFF the computer power before installation. Since both the PC system and the  
Expansion Box are self-powered, you need to follow the correct ON/OFF sequence as  
follows:  
Power Off Sequence: Power off your PC system, then the Expansion Box  
Power On Sequence: Power on the Expansion Box first, then power on your PC system.  
6
3
2
4
Instruction Manual  
4
 
2. Open the top cover of the PEX2PCI4 Expansion Box by removing the screws.  
There are four PCI slots in the Expansion Box. Find an unused slot, remove the “blankPCI  
card bracket that was pre-installed from the factory.  
Insert the PCI card(s) you wish to install, into the available PCI slots, then replace the top  
cover of the Expansion Box.  
3. Connect the DVI-like* connector on the EC2PCI ExpressCard Host  
Adapter Card to the DVI-like port on the rear panel of the PEX2PCI4  
Expansion Box.  
4. Connect the AC Power Adapter to the power port (situated to the left  
of the DVI-like input) on the rear panel of the PEX2PCI4 main unit.  
5. Turn on the Expansion Box power using the power switch next to the  
Expansion Cable, then power on the PC system  
6. Connect the remaining end of the EC2PCI ExpressCard Host Adapter  
Card into the unused ExpressCard expansion slot of the host  
computer, then power on the host computer.  
Software Installation  
If you find the write performance of your PCI Card is not as desired, please install the  
ExpressBooster software supplied with your card.  
*NOTE: When performing this step, please ensure that the DVI port provided by the PCI Express  
expansion card is not confused with a DVI port provided by the computer video card, as this  
could damage the video card, as well as the PCI Express expansion card and PCI expansion  
slot board.  
1. Locate the Setup.exe file found on the driver CD. Assuming that E: is the designation for  
your CD/DVD-ROM drive, double-click on E:\Utility\ExpressBooster to launch the setup  
program.  
2. Follow the setup on-screen instructions; ensure that there is a checkmark next to PCI Express  
Card for Desktops/Servers only (leave the “ExpressCarditem un-checked). Proceed with  
any further on-screen instructions to complete the installation.  
Instruction Manual  
5
 
System requirements  
Bus Type  
PCI  
Connectors  
PCI Expansion Box:  
1 x DVI D (dual link) Female Connector  
PCI Express Card:  
1 x DVI D (dual link) female connector  
Form Factor  
PCI Express (x1)  
Power Adapter  
OS Support  
1 x 12V DC, 3 Amp  
Windows 2000/2003/XP/ Vista/7/ Mac OS X  
CE, FCC, ROHS  
Regulatory Certifications  
EC2PCI (optional)  
Bus Type  
ExpressCard  
Connectors  
1x DVI D Male Connector  
1x ExpressCard Connector  
OS Support  
Windows 2000/XP/2003/Vista/ Mac OS X and  
up  
Regulatory Certifications  
CE, FCC, ROHS  
Instruction Manual  
6
 
Technical Support  
StarTech.com’s lifetime technical support is an integral part of our commit-ment to provide industry-  
our comprehensive selection of online tools, documentation, and downloads.  
Warranty Information  
This product is backed by a two year warranty.  
In addition, StarTech.com warrants its products against defects in materials and workmanship for the  
periods noted, following the initial date of purchase. During this period, the products may be returned  
for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor  
costs only. StarTech.com does not warrant its products from defects or damages arising from misuse,  
abuse, alteration, or normal wear and tear.  
Limitation of Liability  
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors,  
employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, conse-  
quential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to  
the use of the product exceed the actual price paid for the product. Some states do not allow the exclu-  
sion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions  
contained in this statement may not apply to you.  
Instruction Manual  
7
 
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise.  
StarTech.com is your one-stop source for every connectivity part you need. From  
the latest technology to legacy products — and all the parts that bridge the old  
and new — we can help you find the parts that connect your solutions.  
We make it easy to locate the parts, and we quickly deliver them wherever they  
need to go. Just talk to one of our tech advisors or visit our website. You’ll be  
connected to the products you need in no time.  
Visit www.startech.com for complete information on all StarTech.com products  
and to access exclusive resources and time-saving tools.  
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology  
parts. StarTech.com was founded in 1985 and has operations in the United States,  
Canada, the United Kingdom and Taiwan servicing a worldwide market.  
 

Sharp Cell Phone R520_CJ16_MM_111009_F4 User Manual
Shure Telephone EXP 1 User Manual
Snell Acoustics Speaker IW J7 User Manual
Sony Cassette Player WM FX521 User Manual
Sony DVD Player DSR 1600GB User Manual
Sony Indoor Furnishings SU 27F2 User Manual
Sony Microphone F V310 User Manual
Sony Universal Remote DAV SR2 User Manual
Sony Universal Remote RM DC2 User Manual
Speed Queen Clothes Dryer 40125301 User Manual